Email: sales@keepbestpcba.com
China & Thailand factoriesReplies within 24 hours
Sales: sales@keepbestpcba.comChina & Thailand factoriesReplies within 24 hours

PCB assembly capability

From fine-pitch SMT to mixed-technology PCBA.

Review KeepBest's published assembly parameters, production capacity and inspection options. Engineering confirms the final route from your Gerber, BOM, package mix and quality requirements.

01005Minimum listed package0.4 × 0.2 mm component size
0.2 mmMinimum listed BGA pitchSubject to package and board review
3–4MSMT soldering pads/dayPublished production capacity
100KDIP pins/dayPublished through-hole capacity
Order rangeFrom 1 piecePrototype through planned production
Board technologyRigid · Flex · Rigid-flexPanel and handling reviewed per project
Assembly referenceIPC-A-610Acceptance class agreed before production
Inspection optionsSPI · AOI · X-rayICT and FCT planned where required

Assembly technologies

Four routes for different product designs.

The line, soldering method and inspection plan are selected from package density, board construction, production volume and product risk.

01 / SMT

Surface-mount assembly

Automatic printing, SPI, high-speed placement, profile-controlled reflow and AOI for compact assemblies.

02 / THT & DIP

Through-hole assembly

Manual or supported insertion with wave, selective or approved manual soldering.

03 / MIXED

Mixed-technology PCBA

SMT and through-hole operations coordinated under one manufacturing and quality route.

04 / FINISHED PRODUCT

Programming & box build

Programming, functional verification, final assembly, labeling and controlled product release.

Published capability data

Technical limits buyers can review early.

These values are carried forward from the existing capability page. Actual feasibility and lead time are confirmed after engineering reviews the files and production requirements.

PCB assembly capability summary

Use this table for initial planning—not as automatic manufacturability approval.

Minimum order quantity1 piece
Board typesRigid PCB, flexible PCB and rigid-flex PCB
Assembly typesSMT, through-hole, BGA, MicroBGA, QFN and mixed technology
Published board range50 × 50 mm to 610 × 510 mm
Quality referenceIPC-A-610; applicable class and workmanship criteria agreed per project
Minimum listed package01005 (0.4 × 0.2 mm)
BGA capabilityMinimum listed ball diameter 0.14 mm; minimum listed pitch 0.2 mm
Published production capacitySMT: 3–4 million soldering pads/day · DIP: 100,000 pins/day
Optional finishingCleaning, depaneling, conformal coating, programming and finished-product assembly
Inspection & testSPI, AOI, X-ray, ICT and FCT selected according to project requirements
Production capacitySMT lines for prototype and repeat builds
Process controlPrinting and setup matched to the board

Inspection and test

Verification at the checkpoints that matter.

Coverage is chosen for the assembly technology, hidden-joint risk, electrical access and finished-product requirements.

01SPISolder-paste height, area, volume and offset checks
02AOIOptical verification of visible assembly features
03X-rayHidden-joint inspection for BGA and related packages
04ICT & FCTElectrical and functional checks against the test plan

From prototype to production

Capability is confirmed from the actual project.

Board dimensions, panel design, package mix, component availability, fixtures and test coverage can change the final production route. Share the files early so the quotation reflects the real build.

01 / REVIEWGerber & BOMConfirm design data, parts and quantity.
02 / PLANAssembly routeSelect SMT, THT, finishing and fixtures.
03 / VERIFYInspection & testAgree checkpoints and acceptance criteria.
04 / RELEASEBuild & recordsManufacture, verify and release the product.

Confirm the technical fit

Send the board data for engineering review.

Share your Gerber, BOM, target quantity and required inspection or test coverage. We will confirm which published capabilities apply to the project.

Prototype, low-volume and production programsSMT, THT and mixed-technology reviewInspection and test planning before quotation

Request a capability review

Fields marked with * are required.

Replies within 24 hours

Get A Quote

Fill in your requirement information and upload Gerber and BOM files, we will give you a quote within 24 hours.

Get A quote

Fill in your requirement information and upload Gerber and BOM files, we will give you a quote within 24 hours.